English
Brand:
JST SealsItem NO.:
FHRPayment:
T/TProduct Origin:
ChinaShipping Port:
GuangzhouOrder(MOQ):
50High pressure ball valve seat seal
The spring energized seal can select different spring forms and sealing lip designs according to the applications such as dynamic, static, internal and external pressure, resulting in impassable sealing force and compression deformation. The spring force will affect the performance, friction and wear performance of the jacket. The compressible stroke determines the compensation ability of the jacket for the wear of the sealing lip and the dimensional tolerance variation of the sealing groove.
Customized products can be developed according to customers' needs.
|
|
Advantages: 1.Could withstand high pressure and low temperature. 2. Suitable for medium and high pressure environments; 3.Good sealing performance. |
|
Working Conditions |
||
|
Temperature range |
Pressure |
Medium |
|
-100~180℃ |
≤400 bar |
Gas, water |
|
|||||||
| Cross section NO. | O ring section diameter |
Recommended
inner diameter range
d(mm)
|
Width of groove
L(mm)
|
Depth of groove
G(mm)
|
Maximum gap(mm) | Maximum fillet radius R1(mm) | |
| ≥ | ＜ | ||||||
| A | 1.78 | 4 | 10 | 2.4 | 1.45 | 0.13 | 0.4 |
| B | 2.62 | 10 | 20 | 3.6 | 2.25 | 0.13 | 0.4 |
| C | 3.53 | 20 | 40 | 4.8 | 3.1 | 0.15 | 0.6 |
| D | 5.33 | 40 | 120 | 7.1 | 4.7 | 0.17 | 0.8 |
| E | 6.99 | 120 | 700 | 9.5 | 6.1 | 0.25 | 0.8 |
| F | Non-standard items (please specify groove dimensions when ordering) | ||||||
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Categories
The BVR series is made of a canted level spring and a polymer jacket, which is mainly used as a stem seal.
The spring energized seal is a high-performance Teflon seal with a special spring inside.
The FHB seal design of the spiral spring combined arc lip, and the pressure comes from the inside.
LNG Lip Seal For Filling Guns is commonly used in LNG (liquefied natural gas) filling guns.
The seal jacket of adhesive dispenser/dispensing seal is made of ultra-high molecular UHMWPE or PEEK, with installed stainless steel anti-corrosion spring with low temperature resistance treatment.
JST manufactures well service plunger pump packings in a wide variety of materials to suit specific well conditions and operating parameters, they are available in a wide range of elastomeric materials and high performance resins, including NBR, HNBR, FKM, filled PTFE, fabric reinforced rubber. to suit specific well conditions, operating parameters, and fracturing fluids.
A seal assembly for use in a wellbore tool, it acts as a flow restrictor protecting a lower end of the seal assembly from high pressure and/or high volume flow.
OD Face Seal are 100% compatible with Cameron Type FLS and FLS-R Gate Valves, It is spring-loaded and pressure-energized to improve gate and seat service life.
For inquiries about our products or pricelist, please leave to us and we will be in touch within 24 hours.
No. 1, Xinyu North Road, Ningxi Street, Zengcheng District, Guangzhou, China 511340
© Copyright: 2024 Guangzhou JST Seals Technology Co., Ltd. All Rights Reserved.
Scan to wechat
