• September 24. 2021

S seal and O ring both can be used for wellhead casing but they have different functions and suitable for different working conditions. O ring is a static seal. It is suitable for lower pressure, small groove gap and smooth groove surface. O ring is usually combined with back up ring. But in hostile environment, such as H2S, high pressure, high and lower temperature, rough groove surface, o ring w...

• December 14. 2021

For wellhead casing head, tubing hanger, JST provides elastomer seals including FS seal, S seal, P seal, O ring, MEC metal end-cap seal and lock screw packing. These seals are essential elements in the integrity and functionality of wellhead equipment. We developed HNBR, FKM, AFLAS and other material accordingly which have high pressure resistance, good sealing characteristics. 1. Materials tested...

• March 14. 2022

Packer elements are rubber seals that operate under specific down-hole conditions and provide an elastomeric seal for either short-term or long-term completion. Packer elements are used between sections of oil and gas production tubing to prevent fluids and pressure from leaking through the joints. This protects the casing, production tubing, liner and wellbore wall above and below the p...

• April 15. 2022

Packer elements are rubber seals that operate under specific down-hole conditions and provide an elastomeric seal for either short-term or long-term completion. Packer elements are used between sections of oil and gas production tubing to prevent fluids and pressure from leaking through the joints. This protects the casing, production tubing, liner and wellbore wall above and below the producing z...

• April 24. 2022

RGD is known as Rapid Gas Decompression, AED is known as Anti-Explosive Decompression. RGD (Rapid Gas Decompression) or AED (Anti-Explosive Decompression) is a failure mechanism of O-rings and elastomer seals which is caused by the rapid reduction in pressure of the gaseous medium. When the pressure is released, the gas penetrating into the elastomer seal will expand violently, which in turn will ...

• May 06. 2022

JST produces elastomer seal, material includes HNBR, NBR, FKM, AFLAS. There are lots of factors affecting an elastomer seal's performance, such as the chemical reactivity of the elastomer seal , working temperature, working pressure and working medium will influence the sealing performance. To make sure seal with no leakage and suitable for high temperature, lower temperature, high pressure, H2S/C...

• May 20. 2022

Customer Question: Customer used a competitor 's S seal for 10000PSi and PU temperature classes. During installation at the Minden store, using a competitor's elastomer seal, the customer noticed some movement in the valve seat . Application details: Material: HNBR90+316SS Groove: 125 Groove size: 7.181X6.696X0.375inch How is the JST seal solv...

• June 02. 2022

There are many reasons for seal failure, including long-term storage in less than ideal conditions. Rubber may crack, harden, soften or degrade, making it unsafe for its intended use. Most seals have a widely accepted shelf life, which helps manufacturers prevent catastrophic failures caused by old seals. Maintaining the seal throughout its intended shelf life requires providing a storage environm...