• July 28. 2023

In the seals manufacturing process, it is essential to ensure the accuracy of dimensions. Only the correct size can ensure that the seals fit well with the equipment and avoid leakages and failures. Therefore, dimensional measurement becomes an essential job. Preparation before measurement Before you start measuring, you need to do some preparatory work. First, clean the surface of seal to remove ...

• July 21. 2023

The temperatures involved with LNG happens to be at the point where many elastomers and polymer materials lose elasticity and begin to behave as brittle materials. Some seals may also experience dimensional fluctuations related to temperature changes, further increasing the likelihood of failure. If temperature fluctuations are periodic, problems related to cyclic stress will arise. Another issue ...

• July 08. 2023

The chemical name of polytetrafluoroethylene is PTFE (polytetrafluoroethylene). It has the highest chemical resistance and heat resistance, and can resist almost all aggressive substances. PTFE has low lubrication and high sliding speed. Wear resistance is usually low, and PTFE materials are prone to cold flow under pressure. JST Seals can produce PTFE fillers such as carbon fiber, graphite, bronz...

• July 08. 2023

The medical device industry is facing evolving challenges in finding suitable sealing solutions for new and improved designs. We will focus on customizing spring energized PTFE seals as a potential solution to the sealing challenges in the medical industry. PTFE is a popular choice for spring energized seals used in medical applications for several reasons. One is that some grades of PTFE have bee...

• June 29. 2023

The world we know of cannot be achieved without computers - these technologies cannot be achieved without semiconductors. However, as wafers become smaller and smaller, their production also faces unique challenges, with pollution posing greater risks to their integrity and functionality. One factor often overlooked in semiconductor manufacturing is the overall sealing process. Your seal will eith...

• June 20. 2023

The Ring Type Joint was originally developed for high pressure/temperature applications in the petroleum industry, mainly used for drilling and completion equipment in oil fields. However, today, this product series can also be used for valves and pipework assemblies, as well as some high integrity pressure vessel joints. There are three types of ring type joint gasket designs, the R type, RX type...

• June 20. 2023

Hammer Union Seals (Weco Seal) are used in hammer union-style pipe connections to establish flow lines and prevent leakage. They are used in the Oil & Gas Industry, in steel mills, chemical plants, strip mining, and marine dredging. JST Hammer Union Seals are available in a range of configurations and materials to match the specific performance requirements of your demanding operating env...

• June 13. 2023

Packer elements are components used in oil and gas well completion operations to isolate different zones of the wellbore. The design factors of packer elements include: Material Selection: The choice of material for the packer element is critical to its design. It needs to be able to withstand the downhole conditions, such as high temperatures, pressures, and corrosive fluids. Common materials use...

• June 13. 2023

Packer Elements are elastomeric components designed to be used between sections of oil and gas production tubing, providing superior sealing and isolation capabilities. Made of high-quality rubber material such as NBR, HNBR and Aflas, the packer element provides superior sealing performance, ensuring maximum well integrity and efficient production. Designed for challenging downhole environments, P...

• June 07. 2023

OD (Outer Diameter) face seals are used on the FLS and FLS-R seat. They are a type of mechanical face seal that's used in conjunction with the ID (Inner Diameter) face seal to provide a seal between the seat and the seat pocket of FLS style valves. FLS ID and OD face seals are used in all sizes of valves ranging from 1-13/16” to 7-1/16”. The OD seal you’ll receive is spring-loaded and pressure-ene...