Well completion liner wiper plug

The FHB seal is made of a helical wound spring and a polymer jacket, which is mainly used as a Flange internal face seal.

FFKM O-ring is a circular seal made of perfluoroelastomer compound, with a higher fluorine content than FKM fluoroelastomer.

Dovetail groove is used to put the O-ring or elastomer dovetail seal during installation. This groove is not common because it is more expensive to machine, but this dovetail groove can avoid seal extrusion out.

The ID S seal is used for wellheads, downhole tools and surface pressure control equipment as a critial part.

The V Stack seal assembly is comprising a top adapter or anti-extrusion ring (1), Vee Rings (2) and a bottom adapter (3). In the assembly the energizing axial force is transferred between the individual packing rings so that each ring is pressed into positive contact with the mating hardware surface. Special material grades are available for a large variety of working conditions.   The chevron seal stack material could be PEEK, modified PTFE and spring.

Nylon BX R RX style Test Ring Gasket is good for valve pressure test. JST Nylon ring joint test gaskets are a no damaging method to test and re-certify ring type joint flanges.

SPGO is a low friction piston seal consisting of PTFE+Bronze seal ring and rubber o-ring used for two-way piston seal of Hydraulic cylinder, to seal in fluid, thus preventing the flow of fluid across the piston, allowing pressure to build up on one side of the piston.  

The function of a hydraulic wear ring is to guide the piston and piston rod of a hydraulic cylinder, absorbing transverse forces. At the same time, it prevents metal-to-metal contact, optimizing the performance of the sealing system.