English
Brand:
JST SealsItem NO.:
BVRPayment:
T/TProduct Origin:
ChinaShipping Port:
GuangzhouOrder(MOQ):
50Ball valve seat seals for Cryogenic Valve and LNG Application
The BVR series is made of a canted level spring and a polymer jacket, which is mainly used as a seat seal.
The cryogenic valve seat seals for 6D Ball valve is mainly used for single-piston valve seat of 6D ball valve (temperature range IS-50~260 pressure range can reach 2500LB). A support ring is needed to protect the sealing lip when the reverse pressure in the middle cavity exceeds 1.33 times of rated pressure. When it is above 1500LB, need to add back-up ring the bottom.
According to different working conditions and application, JST will make related adjustments to the products, including but not limited to: changing the seal jacket material, changing the spring technology, adding T cover, adding gaskets, etc.
 |
Advantages:
1. Material compound passed API 6A FF/HH Immersion Testing; |
|
Working Conditions |
||
|
Temperature range |
Pressure |
Medium |
|
-50~180℃ |
150LB, 300LB, 600LB, 900LB, 1500LB, 2500LB |
LNG, Low temperature ethylene |
| API 6D Stem Seal selection table | ||||||
|
Groove DWG:
|
||||||
| Temperature Rating | JST Series | Spring | 0~900（LBS) | 900~2500(LBS) |
G=(OD-ID)/2
Standard CS:G=(OD-ID)/2
|
L Value |
| (-50℃~180℃) | BVR |
Elgiloy
|
 |
 |
3.1 | 7 |
| 4.55 | 9 | |||||
| 6.1 | 13 | |||||
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Categories
Bidirectional high-pressure ball valve seat seal is a type of seat sealing that can withstand bidirectional pressure, with good low-temperature performance and airtightness, and is widely used in 6D ball valves.
JST FHR series is made of a helical wound spring and a polymer jacket, which is mainly used for rod.
JST FHP series is made of a helical wound spring and a polymer jacket, which is mainly used for piston.
The FHB seal is made of a helical wound spring and a polymer jacket, which is mainly used as a Flange internal face seal.
The ID S seal is used for wellheads, downhole tools and surface pressure control equipment as a critial part.
DKBI wipers are installed in the sealing configurations of hydraulic cylinders to prevent contaminants such as dirt, dust and moisture from entering the cylinder as they retract back into the system.
JST manufactures well service plunger pump packings in a wide variety of materials to suit specific well conditions and operating parameters, they are available in a wide range of elastomeric materials and high performance resins, including NBR, HNBR, FKM, filled PTFE, fabric reinforced rubber. to suit specific well conditions, operating parameters, and fracturing fluids.
A glass filled nylon wear ring, also called wear band, offers high bearing load capacity over a broad range of temperatures.
For inquiries about our products or pricelist, please leave to us and we will be in touch within 24 hours.
No. 1, Xinyu North Road, Ningxi Street, Zengcheng District, Guangzhou, China 511340
© Copyright: 2025 Guangzhou JST Seals Technology Co., Ltd. All Rights Reserved.
Scan to wechat
