English
The FS-seal is a relatively large cross section spring energized elastomer casing and tubing hanger seal for wellheads that always has the springs on the internal surface.
Item NO.:
SFSPayment:
T/TProduct Origin:
ChinaShipping Port:
GuangzhouOrder(MOQ):
50Casing head and tubing hanger FS seal
The FS-seal is a relatively large cross section spring energized elastomer casing and tubing hanger seal for wellheads that always has the springs on the internal surface.
FS seal is a custom designed spring energized elastomer seal, which combines the advantages of the overall support assembly and the flexibility of elastomer seal, and can provide the maximum extrusion resistance in the demanding high-pressure sealing environment. FS seal is ideal for many chemical processing, chemical transportation and oil and gas applications, such as oilfield casing and tubing.
 |
Advantages:
1. Improve equipment reliability |
|
Working Conditions |
|||
|
Temperature range |
Pressure |
Medium |
|
|
LU, PU, SX |
≤20000 PSI |
Oil, water, Gas, H2S, CO2 etc |
|
Size:
From 4-1/2" to 30"
|
|||||
| Inch | mm | ||||
|
Nominal casing
d |
Outer diameter of groove
D |
Height of groove
H |
Nominal casing
d |
Outer diameter of groove
D |
Height of groove
H |
| 3.500 | 4.688 | 0.835 | 88.90 | 119.06 | 21.21 |
| 4.000 | 5.250 | 0.835 | 101.60 | 133.35 | 21.21 |
| 4.500 | 5.750 | 0.835 | 114.30 | 146.05 | 21.21 |
| 4.750 | 6.000 | 0.835 | 120.65 | 152.40 | 21.21 |
| 5.000 | 6.250 | 0.835 | 127.00 | 168.28 | 21.21 |
| 5.500 | 6.750 | 0.835 | 139.70 | 171.45 | 21.21 |
| 5.750 | 7.000 | 0.835 | 146.05 | 177.80 | 21.21 |
| 6.000 | 7.250 | 0.835 | 152.40 | 184.15 | 21.21 |
| 6.250 | 7.875 | 0.835 | 168.28 | 200.03 | 21.21 |
| 7.000 | 8.250 | 0.835 | 177.80 | 209.55 | 21.21 |
| 7.625 | 8.875 | 0.835 | 193.68 | 225.43 | 21.21 |
| 7.750 | 9.000 | 0.835 | 196.85 | 228.60 | 21.21 |
| 8.625 | 9.875 | 0.835 | 219.08 | 250.83 | 21.21 |
| 9.000 | 10.250 | 0.835 | 228.60 | 260.35 | 21.21 |
| 9.625 | 10.875 | 0.835 | 244.48 | 276.23 | 21.21 |
| 9.875 | 11.125 | 0.835 | 250.83 | 282.58 | 21.21 |
| 10.000 | 12.000 | 1.000 | 254.00 | 304.80 | 25.40 |
| 11.750 | 13.125 | 1.000 | 298.45 | 333.38 | 25.40 |
| 11.875 | 13.250 | 1.000 | 301.63 | 336.56 | 25.40 |
| 13.375 | 14.750 | 1.000 | 339.73 | 374.65 | 25.40 |
| 13.625 | 15.000 | 1.000 | 346.08 | 381.00 | 25.40 |
| 14.000 | 15.375 | 1.000 | 355.60 | 390.53 | 25.40 |
| 16.000 | 17.375 | 1.000 | 406.40 | 441.33 | 25.40 |
| 18.625 | 20.000 | 1.000 | 473.08 | 508.00 | 25.40 |
| 20.000 | 22.063 | 1.563 | 508.00 | 560.39 | 39.69 |
| 24.000 | 26.063 | 1.563 | 609.60 | 662.00 | 39.69 |
| 30.000 | 32.063 | 1.563 | 762.00 | 814.40 | 39.69 |
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Categories
Wellhead secondary pack off seal is used to seal the hanger to the wellhead.
T-seals are three piece seals with an elastomeric lip and hard plastic anti-extrusion rings, it is proved to be of long time service. The standard design will fit into an o-ring gland and can be machined or net moulded.
Lockdown screw seal is used mainly in geothermal applications, HNBR packing with stainless steel caps provide superior performance over metal pressure seals.
The ID S seal is used for wellheads, downhole tools and surface pressure control equipment as a critial part.
Pack off seal or Secondary Seal Assemblies is installed in the lower seal area of the Casing Spool or Tubing Head.
P seal is constructed from an elastomer with back up rings for anti-extrusion. Energized by the injection of sealant, it is a static seal that is used to seal rough casing and tubing. Backup rings are available in Mesh Stainless Steel or Solid Carbon Steel.
BT Seal is a static seal that is used to seal rough casing and tubing. It is constructed from an elastomer with anti-extrusion spring bonded within it. Springs are available in stainless steel, elastomer could be HNBR or NBR.
S-Seal is designed for extreme oil and gas applications. It is a technologically advanced replacement for traditional three-piece T-Seals or O-Rings with back-ups.
For inquiries about our products or pricelist, please leave to us and we will be in touch within 24 hours.
No. 1, Xinyu North Road, Ningxi Street, Zengcheng District, Guangzhou, China 511340
© Copyright: 2024 Guangzhou JST Seals Technology Co., Ltd. All Rights Reserved.
Scan to wechat
