English
The spring energized seal is a high-performance Teflon
seal with a special spring inside.
Brand:
JST SealsItem NO.:
FHCPayment:
T/TProduct Origin:
ChinaShipping Port:
GuangzhouOrder(MOQ):
50Helical Spring ball valve stem seal
Helical Spring ball valve stem seal is a high-performance Teflon seal with a special spring inside. The elastic force given by the special spring plus the pressure of the system fluid pushes the sealing lip out, and the sealing lip presses the sealed metal surface to form the required excellent sealing effect.
The use of a spring energized seal can completely improve rubber softening, expansion, wear and other issues, thus greatly improving the service life of the ball valve.
The polymer jacket's material includes PTFE, TFM, PCTFE, etc.
Our design brings the performance of Lip Seal to the next level with remarkable benefits to manufacturers of Cryogenic Trunnion Mounted Ball Valves.
Spring energized seals usually occur in environments that exert excessive pressure on traditional elastic seals: extreme temperature and pressure, high levels of friction and wear, or corrosive media are the most common. Since the high-performance plastic of the spring energized seal is machined, the seal configuration can be changed according to your specific needs.
 |
Advantages: 1. Effectively reduce friction resistance and wear. 2. Greatly improve the sealing performance and service life. 3. Any anti-pollution material can be filled in the groove of the seal. 4. Clean and will not cause pollution. 5. Low friction coefficient, and it is very smooth even in very low speed applications. 6. The starting friction is small, even if the stop time is long or intermittent operation, the low starting power performance can be maintained. |
|
Working Conditions |
||
|
Temperature range |
Pressure |
Medium |
|
-50~200℃ |
≤500 bar |
LNG, Low temperature ethylene |
 |
||||||
| Cross section NO. | O ring section diameter |
Recommended inner diameter
range
d(mm)
|
Depth of groove
L(mm)
|
Width of groove
G(mm)
|
Maximum fillet radius R1(mm) | |
| ≥ | ＜ | |||||
| B | 2.62 | 32 | 45 | 2.25 | 3.6 | 0.4 |
| C | 3.53 | 45 | 80 | 3.1 | 4.8 | 0.6 |
| D | 5.33 | 80 | 110 | 4.7 | 7.1 | 0.8 |
| E | 6.99 | 110 | 700 | 6.1 | 9.5 | 0.8 |
| F | Non-standard items (please specify groove dimensions when ordering) | |||||
Previous:
Ball valve high pressure lip sealIf you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Categories
The ball valve seat is responsible for sealing the fluid inside and uniformly distributing the seating stress. A leak of ball valve in petrochemical application could be environmentally devastating.
The BVR series is made of a canted level spring and a polymer jacket, which is mainly used as a stem seal.
The FHB seal design of the spiral spring combined arc lip, and the pressure comes from the inside.
LNG Lip Seal For Filling Guns is commonly used in LNG (liquefied natural gas) filling guns.
Lockdown screw seal is used mainly in geothermal applications, HNBR packing with stainless steel caps provide superior performance over metal pressure seals.
The BVR series is made of a canted level spring and a polymer jacket, which is mainly used as a stem seal.
We have been manufacturing various types of fluid end valve and seats for both frac pumps and mud pumps, covering various models for the most dominant pumps in the market.
SPGO is a low friction piston seal consisting of PTFE+Bronze seal ring and rubber o-ring used for two-way piston seal of Hydraulic cylinder, to seal in fluid, thus preventing the flow of fluid across the piston, allowing pressure to build up on one side of the piston.
For inquiries about our products or pricelist, please leave to us and we will be in touch within 24 hours.
No. 1, Xinyu North Road, Ningxi Street, Zengcheng District, Guangzhou, China 511340
© Copyright: 2024 Guangzhou JST Seals Technology Co., Ltd. All Rights Reserved.
Scan to wechat
