
O ring is an annular rubber seal with a circular cross section, mainly used in mechanical parts in static conditions to prevent the leakage of liquid and gas. In some cases, O ring can also be used as the dynamic sealing element in axial reciprocating motion or low-speed rotational motion. O ring provides as an effective and economical sealing element in different types of static or dynamic seal a...
Packer elements are rubber seals that operate under specific down-hole conditions and provide an elastomeric seal for either short-term or long-term completion. Packer elements are used between sections of oil and gas production tubing to prevent fluids and pressure from leaking through the joints. This protects the casing, production tubing, liner and wellbore wall above and below the p...
The bonded seal is used in work-over and sand control operations. With the bonding of elastomer to a steel core, this serve to prevent excessive rubber compression under loading. JST manufactures a complete size-range of rubber-to-metal bonded seals. We use an exclusive two-phase manufacturing process to produce highly-reliable bonded seals capable of controlling either conventional wellbore fluid...
Packer elements are rubber seals that operate under specific down-hole conditions and provide an elastomeric seal for either short-term or long-term completion. Packer elements are used between sections of oil and gas production tubing to prevent fluids and pressure from leaking through the joints. This protects the casing, production tubing, liner and wellbore wall above and below the producing z...
O-ring, also called O-shaped rubber ring, are used to prevent leakage and prevent external contaminants from penetrating the hydraulic system. It can be sealed within various pressure, temperature and tolerance ranges. It has small volume, light weight and can be reused. It has various sizes and materials to choose from. Product specification The size of the O-ring is determined by the inner diame...
With the development of fracturing and acidizing application technology, fracturing pumps with high pressure and large flow are required. The working condition of fracturing pump is extremely bad: high pressure, high acidity, high sand content and high sand hardness. Poor working conditions make the service life of the plunger pump seals short and the maintenance frequent. Sometimes, the seals mad...
1. Wellhead Casing Structure Wellhead casing usually consists of four-way, casing hanger, top wire assembly, flange parallel gate valve, connector, pressure display mechanism, etc; 2. Working principle of Rubber Seal The wellhead casing consists of the wellhead casing body, BT seal, casing hanger, dovetail seal , lockdown screw seal and sealing gasket. The casing hanger seat is hung on the steps o...
PTFE seal is the core of hydraulic equipment and the guarantee for normal operation of hydraulic equipment. Therefore, the installation of PTFE seals is very important. Any error in the installation process may affect the sealing performance, and then affect the normal operation of hydraulic equipment. Therefore, it is necessary for operators to understand the installation precautions of PTFE seal...
New Blog
© Copyright: 2025 Guangzhou JST Seals Technology Co., Ltd. All Rights Reserved.
Scan to wechat