English
Back-up Ring/Anti Extrusion Rings is a ring that holds an elastomeric seal to its outline shape and in its right place. and are typically used with O Rings to eliminate extrusion at high pressures.
Brand:
JST SealsItem NO.:
DQQ/DQKPayment:
T/TProduct Origin:
ChinaShipping Port:
GuangzhouOrder(MOQ):
50PEEK PTFE POM back up ring
Back-up Ring/anti extrusion back up rings are a ring that holds an elastomeric seal to its outline shape and in its right place. and back up ring seal is typically used with O Rings to eliminate extrusion at high pressures.
Peek backup rings are protective and supporting elements made of anti extrusion materials, usually with rectangular cross-section. They are installed in grooves together with elastic seals. In static applications, elastic seals are preferably equipped with corresponding O-rings. Because the backup rings fit closely with the housing, they prevent the pressurized elastic seal from squeezing into the sealing gap.
PEEK is a semi-crystalline, show high stiffness and hardness, has an unique high tensile strength and fatiue strength, Resistant to high-engery radiation, high abrasion and wear resistant, good electrical insulator even at high voltages, and is characterised mainly by its very good mechanical properties and exceptional dimensional stability even continous operation at high temperatures of up to 250°C.
Our backup rings are made of pure PTFE, filled PTFE or peek, depending on the application.
 |
Advantages: 1. Quick and easy installation. |
| Working Conditions | |||
| Material | PEEK | PTFE | POM |
| Pressure | ≤310Mpa | ≤69Mpa | ≤103Mpa |
| Temperature | -60℃ to +200℃ | -46℃ to +180℃ | 0℃ to +110℃ |
| Medium | Most of the chemicals, except Strong nitric acid and concentrated sulfuric acid. | Most of the chemicals, except molten sodium and liquid fluorine. | Most of the chemicals, not suitable for acid,Strong Alkali, UV etc enviroment. |
Size:
Diameter:φ3-φ500mm
PTFE backup ring's Dimension can be customized
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Categories
Wipers are installed in the sealing configurations of hydraulic cylinders to prevent contaminants such as dirt, dust and moisture from entering the cylinder as they retract back into the system.
In LNG operations, valves can regularly encounter temperatures below -320 F (-196 C) and pressures above 750 pounds per square inch (psi). They are also subjected to periodic variations in temperatures known as “thermal cycling,” which can result in hardware expansion as well as shrinkage and material stresses. These factors make reliable, long-term valve operation an engineering challenge.
Oil-free Air compressor PTFE piston cup seals extensively used for steam, oil, water, and other chemical applications.
JST's RGD (Rapid Gas Decompression) o ring can be applicated in high and low temperature environment with high pressure. It is widely used in detection and drilling equipment, completion equipment, underwater valves and pumps, compressor ect.
ODU Piston seals are work to seal in fluid, thus preventing the flow of fluid across the piston, allowing pressure to build up on one side of the piston.
The PTFE gate valve seat seal is made of durable teflon, it is used in rotating equipment to minimize o-ring movement.
Swivel joint ball plug is working together with hammer union seals, to seal the balls of high pressure elbows and grease.
Piston seals are work to seal in fluid, thus preventing the flow of fluid across the piston, allowing pressure to build up on one side of the piston.
For inquiries about our products or pricelist, please leave to us and we will be in touch within 24 hours.
No. 1, Xinyu North Road, Ningxi Street, Zengcheng District, Guangzhou, China 511340
© Copyright: 2026 Guangzhou JST Seals Technology Co., Ltd. All Rights Reserved.
Friendly Links:
VonesealsScan to wechat
