English
JST's back up ring compensate for large temperature fluctuations. Using Back-up Rings allows O-Rings to be utilized in higher pressure applications, where larger extrusion gaps are required and where there are reciprocating or rotating movements.
Back-up Rings are protective and supporting elements with no sealing function.
The back up ring material could be PEEK, modified PTFE.
Brand:
JST SealsItem NO.:
DQQ/DQKPayment:
T/TProduct Origin:
ChinaShipping Port:
GuangzhouOrder(MOQ):
50Downhole PEEK back-up rings
JST makes custom and standard PEEK back-up rings.
Custom sizes up to 24” outer diameter.
Elastomer O-rings serve as effective seals for dynamic and static applications in hydraulic and pneumatic equipment systems. A drawback of elastomer O-rings is their tendency to extrude into the clearance of mating surfaces with increasing pressures and temperatures. Higher temperatures impose a severe burden on the physical and mechanical properties of elastomer O-rings, which further increases their tendency to extrude. The combination of high pressures and high temperatures is a common occurrence in fluid systems. This establishes the need for the back-up ring in preventing O-Ring extrusion.
JST makes various types of PEEK™ back-up ring designs.
PEEK back-up rings material
Virgin PEEK™
● Engineered thermoplastic.
● PEEK™ can be used up to 480°F.
● Excellent chemical resistance.
● Very low moisture absorption.
● Good wear and abrasion resistance.
Glass filled PEEK™
● PEEK™ with the addition of glass fibers.
● Glass fibers reduce the expansion rate and increase the flexural modulus.
 |
Advantages:
1. Prevents O-Ring extrusion. |
|
Working Conditions |
||
|
Working Pressure |
Temp range |
Media |
|
≤10000PSI |
≤350°F |
Compatible with virtually all media and gases |
Size:
47.60X41.78X2.29mm
47.60X43.56X1.42mm
52.77X47.23X2.03mm
57.19X48.6X3.45mm
59.23X55.27X2.29mm
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Categories
JST FHP series is made of a helical wound spring and a polymer jacket, which is mainly used for piston.
The pump plunger sealing system is adopted in the pump, which can effectively prevent the damage caused by water leakage and prevent the pump failure caused by the plunger friction overheating.
In LNG operations, valves can regularly encounter temperatures below -320 F (-196 C) and pressures above 750 pounds per square inch (psi). They are also subjected to periodic variations in temperatures known as “thermal cycling,” which can result in hardware expansion as well as shrinkage and material stresses. These factors make reliable, long-term valve operation an engineering challenge.
Spring energized valve stem packing contributes to the overall performance of industrial operations. They serve the vital task of keeping oil and liquids in while keeping contaminants out.
JST's Packer elements are flexible elastomeric components that are used to seal between the outside diameter of the production tubing and the casing, liner or wellbore.
This product can fully meet the pressure working conditions of current hydrogen compressor transportation equipment, ranging from 0 to 90MPa, and the sealing element will not extrude and deform, with good sealing performance.
We have been manufacturing various types of fluid end valve and seats for both frac pumps and mud pumps, covering various models for the most dominant pumps in the market.
A glass filled nylon wear ring, also called wear band, offers high bearing load capacity over a broad range of temperatures.
For inquiries about our products or pricelist, please leave to us and we will be in touch within 24 hours.
No. 1, Xinyu North Road, Ningxi Street, Zengcheng District, Guangzhou, China 511340
© Copyright: 2025 Guangzhou JST Seals Technology Co., Ltd. All Rights Reserved.
Scan to wechat
